China Hot

China Hot

Product Description

1. Work Flow
1) Pumping the feedstock into the sedimentation tank 1# and 2#, adding some catalyst, injecting the air by compressor into the sedimentation tanks for making the feedstock and catalyst mixed well, sedimentation quietly for 5hours.

2) After sedimentation, discharging the sediment, pumping the feedstock after sedimentation into distillation kettle.

3) Starting the high-temp circulated oil pump for distillation and the heating furnace, the feedstock will be heated during distillation kettle and furnace, when they reach the distillation cuts temp, through the rectifying tower into the oil-gas cyclone sedimentation tank for separating the ash, then into the oil-gas condenser and getting the diesel and gasoline separately stored.

4) The part of non-condensable gas into the vacuum buffering tank, vacuum pump, water seal, back fire device and into the heating furnace for supplying heat.

5) When there is "low" alarming on the liquid level, it should start to pump the feedstock (after sedimentation in tank 1# and 2#) into the distillation kettle, the whole distillation process is continuous.

6) When there is no alarming on the liquid level, but the diesel color is very dark, it shows there is much more residual oil in the distillation kettle and should discharge, then put into the residual oil tank.
1) Pumping the feedstock into the sedimentation tank 1# and 2#, adding some catalyst, injecting the air by compressor into the sedimentation tanks for making the feedstock and catalyst mixed well, sedimentation quietly for 5hours.

2) After sedimentation, discharging the sediment, pumping the feedstock after sedimentation into distillation kettle.

3) Starting the high-temp circulated oil pump for distillation and the heating furnace, the feedstock will be heated during distillation kettle and furnace, when they reach the distillation cuts temp, through the rectifying tower into the oil-gas cyclone sedimentation tank for separating the ash, then into the oil-gas condenser and getting the diesel and gasoline separately stored.

4) The part of non-condensable gas into the vacuum buffering tank, vacuum pump, water seal, back fire device and into the heating furnace for supplying heat.

5) When there is "low" alarming on the liquid level, it should start to pump the feedstock (after sedimentation in tank 1# and 2#) into the distillation kettle, the whole distillation process is continuous.

6) When there is no alarming on the liquid level, but the diesel color is very dark, it shows there is much more residual oil in the distillation kettle and should discharge, then put into the residual oil tank.

1) Pumping the feedstock into the sedimentation tank 1# and 2#, adding some catalyst, injecting the air by compressor into the sedimentation tanks for making the feedstock and catalyst mixed well, sedimentation quietly for 5hours.

2) After sedimentation, discharging the sediment, pumping the feedstock after sedimentation into distillation kettle.

3) Starting the high-temp circulated oil pump for distillation and the heating furnace, the feedstock will be heated during distillation kettle and furnace, when they reach the distillation cuts temp, through the rectifying tower into the oil-gas cyclone sedimentation tank for separating the ash, then into the oil-gas condenser and getting the diesel and gasoline separately stored.

4) The part of non-condensable gas into the vacuum buffering tank, vacuum pump, water seal, back fire device and into the heating furnace for supplying heat.

5) When there is "low" alarming on the liquid level, it should start to pump the feedstock (after sedimentation in tank 1# and 2#) into the distillation kettle, the whole distillation process is continuous.

6) When there is no alarming on the liquid level, but the diesel color is very dark, it shows there is much more residual oil in the distillation kettle and should discharge, then put into the residual oil tank.

2.Specification

NO. Name Oil Refining plant
1 The raw materials: Tire oil,pyrolysis oil, fuel oil,used engine oil,black oil
2 Out put Base oil/diesel
3 Oil color Shallow yellow/bright yellow
4 Daily capacity: 5 ton /day
6. The size of reactor(D*L) 1800*3000mm
7. Reactor material Q345R
8. Final oil out rate 85 %
9 Feeding way continuous
10 Slag out Auto continuous
11 Working area 500-600 square meters
12. Cooling way By water
13 Heating way Direct/indirect
14 Working presure Normal/slightly negative
15 Effective working temperature 280-400ºC
16 Power 12 kw
17 voltage 220v/380v
18 Fuel to heating Coal wood, gas oil, etc
19. type Pollution free
20. Certificate CE,ISO
21 Heating fuel Coal .wood, gas. Oil.electric

3.Major parts
a.Reactor
b.Catalyst tower
c.Heat exchanger
d.Pipe condenser
e.condenser
f. filter
g. Pipe combination cooling pool
h. Light component oil collection tank
i. Middle component oil collection tank
j. Vacuum device
k .Residue oil tank
l. Smoke dust disposal device
Include strong spray tower,draft fan,activated carbon absorption tower,recycle purify water pool
m .Filter sand filter
n .Water sealing
o .Stirring tank
p. Operation platform
q .Power distribution cabinet
r. Other attachment

4.Plant Featurs:
A. ).Continuous operating for 90 days without coking.
B) .Latest tubular heating system which can save fuel 20–30%.
c).All sealed and auto feeding and slag discharging system, available in 350degree temperature condition.
d) This model is for processing waste engine oil into diesel oil.
E).The output should be above 90%, water percent affect the data obviously.
Our distillation machine can distillate the flowing materials, turn the waste to energy.
–  Fuel oil extracted from waste plastics and scrap rubber.
–  Waste engine oil.
–  Waste raw oil.
–  Waste washing oil.
–  Waste oil, Raw oil.
–  Waste lubricating oil.
F ) .Increase oil yield 5% compared to the similar plant, oil yield rate reaches to 80%.
G). Unique condensers and vacuum device makes our pyrolysis oil distillation machine highly efficient.
H )  Advanced device and design to make sure the distillation process is proceeding in a total environmental and safe surrounding.
i) . Multiple methods to eliminate color and odor of the distilled oil which ensures the final oil is of high quality.
J). The complete set of unit produce no smoke and no smell.

5. OIL  PARAMTER AFTER DISTILLATION

Project Diesel Standard
Oxidation stability 2.2 ≤2.5mg/100ml
Sulfur content(%) 0.3 M/m ≤0.2
10% steamed residual  carbon residue (%) 0.33 M/m ≤0.3
Ash content (%) 0.16 %M/m ≤0.01
Water content (%) traces /
Mechanical impurities / /
Density (G/ML) 0.85 0.83-0.87
Solidifying point(ºC) -10 0
Flash point (closed )(ºC) 45 55
Movement viscosity 3.5 (20ºC ) mm2/s
3.0-8.0
Combustion value(Kcal) 9500 8500
Colority 1.2 ≤3.5
Cetane number 40 45
Acidity / Mgkoh/100ml≤7

 

Parameters Table

Model NO.
E100-3000t/d

Trademark
CHEMSTA

Origin
China

HS Code
8479200000

Production Capacity
10 Sets/Y

Parameters Table

Trademark
CHEMSTA

Origin
China

HS Code
8479200000

Production Capacity
10 Sets/Y

Parameters Table

Trademark
CHEMSTA

Origin
China

HS Code
8479200000

Production Capacity
10 Sets/Y

Parameters Table

Model NO.
AXE-AM02

Press Materials
All Oil Seeds

Press Series
Fourth

Condition
New

Customized
Non-Customized

Material
Carbon Steel

with Filter
Yes

Transport Package
Standard Export Package

Specification
1900*900*1900MM

Trademark
Anxier

Origin
China

HS Code
847920000

Production Capacity
2000PCS/Year

Parameters Table

Model NO.
AXE-AM04

Press Materials
All Oil Seeds

Press Series
Fourth

Condition
New

Customized
Non-Customized

Material
Carbon Steel

with Filter
Yes

Transport Package
Standard Export Package

Specification
2000*1500*1700MM

Trademark
Anxier

Origin
China

HS Code
847920000

Production Capacity
2000PCS/Year

Parameters Table

Model NO.
xhzl-05

Input
Crude Oil Sludg/Waste Oil

Output
Diesel /Gasoline

Heating Way
Direct Heating /Indirect Heating

Working Area
500 Square Meters

Total Weight
25 Ton

Cooling Way
by Water Cooling

Power
15 Kw

Water Consumption
200kgs

Transport Package
Reinforce Pack

Specification
XHZL-05

Trademark
XHZT

Origin
Shagnqiu, Henan, China

HS Code
84198990

Production Capacity
25sets

Parameters Table

Model NO.
AXE-AM04

Press Materials
All Oil Seeds

Press Series
Fourth

Condition
New

Customized
Non-Customized

Material
Carbon Steel

with Filter
Yes

Transport Package
Standard Export Package

Specification
2000*1500*1700MM

Trademark
Anxier

Origin
China

HS Code
847920000

Production Capacity
2000PCS/Year