China 8

China 8

Product Description

8-10T/D crude palm oil refining machine, oil refining unit
Technical and Performance Indexes in Palm Oil Pressing Workshop
(1)Crude palm oil standard:

FFA :

Less than 5 %

Moisture :

Less than 0.1 %

Dirt:

Less than 0.02 %

(2)Kernel Standard :

Broken Kernel:       

Less than 15 %

Moisture:       

Less than 7 %

Dirt:

Less than 6 %

Palm Fruit Oil Pressing Process Description

The palm oil is contained in palm pulp, the pulp is high moisture content and rich lipase. Usually we adopt the method of press to produce it, and this technology is very mature. Before press , Fresh fruit bunch will be taken sterilizer and thresher pretreatment : After weighting the FFB , it is loaded the FFB conveyor by loading ramp, then the FFB will convey to the vertical sterilizer. FFB will be sterilized treatment in sterilizer, the FFB will be heated and sterilized treatment for several time to avoid the lipase be hydrolyzed , after sterilizer ,the FFB is distributed bunch conveyor by the mechanical bunch feeder and enter the thresher machine which separate the palm fruit and bunch , for the empty bunch ,it is conveyed empty bunch loading platform and transport it to outside the factory area at fixed period , the empty bunch could be used as fertilizer and repeat use ; The palm fruit which has passed sterilizer and thresher processing should be sent to digester and then go to special screw press to get the crude palm oil (CPO) form the pulp . But the pressed palm oil contain a lot of water and impurity which need to be clarified by sand trap tank and treated by the vibrating screen ,afterward the CPO will be sent to clarification station treatment section . For the wet fibre cake which be produced by screw press, after separating nut, it will be sent to boiler house to burnt.
The wet fiber cake contain wet fiber and wet nut, the fiber contain about 6-7% oil and fat and a few of water .Before we produce the nut, we should separate the nut and fiber . Firstly, the wet fiber and wet nut enter the cake breaker conveyor to be cracked, and mostly of the fiber should be separated by pneumatic fiber depericarper System. The nut, little fiber and big impurity will be further separated by the polishing drum. The separated nut should be sent to nut hopper through the pneumatic nut transport system, and then adopt the ripple mill to crack the nut, after cracking , most of the shell and kernel will be separated by cracked mixture separating system, and the rest of mixture of kernel & shell enter to the special clay bath separating system to separate them, after this processing , we could get pure kernel(The shell content in kernel <6%),which should be conveyed to the kernel silo to dry. After dried moisture as 7%, the kernel will be conveyed to kernel storage bin for storage; Usually the dry kernel’s capacity ratio is 4% . So it should be collected until enough quantity, and then be sent to the palm kernel oil mill; For the separated shell, it should be conveyed to shell temporary bin as the spare boiler fuel.

After screen and sand trap tank, the palm oil should be sent to crude oil tank and heat , then be pumped continuous clarification tank to separate the purified oil which be sent to pure oil tank and the sludge oil which be sent to sludge tank , whereafter the sludge oil should be pumped to the centrifuge to separate, the separated oil enter the continuous clarification tank again; The pure oil in the pure oil tank should be sent to the oil purifier , and then enter the vacuum dryer , at last the dried oil should be pumped collection tank.

FAQ      

Q1:What is the warranty for the machines?

A1:24 months free guanantee and life long standard paid service.

Q2:What is the material?

A2:Stainless steel and carbon steel.

Q3:How many areas are required to build my plant?

A3:The land area required usually depends on the capacity of your plant.We can calculate the area needed and design your plant.

Q4:Will this kind of refinery machine applicable to different types of crude oil?

A4:Yes,and this refinery machine is low consumption and high output.

We could custom-made & design according to customer’s requirements

Q5:Do you offer overseas installation?

A5:We’ll dispatch professional installation engineer to guide the equipment installation,as well as training your workers.

Q6:Where is your factory located?

A6:Hua county,Henan Province,China.


Henan Huatai Cereals and Oils Machinery
 Co.,Ltd.
 is a company specialized in grain and oil machinery plant manufacture.
 we have over 60 years experience in this line. now we have 50 engineers and 30 person’s R&D team, we also cooperate with university and attract professors as our counselor. All these above is the guaranty of our machine’s quality. We have 30 experienced installation engineers, they will be appointed to your country to installation and training your workers to operate the machine. Our sales team will do our best to give you suggestions and communicate with engineers to supply you the high quality machine , best service and after sales service .  

Our main product :
(1) Cooking oil production line. The feedstock can be palm fruit, palm kernel, rice bran, corn germ /maize germ, sunflower seed, rapeseed, soybean seed, cotton seed, sesame and other oilseeds 
(2) Grain mill production line. We can supply you different capacity from 5-1000tons wheat flour mill machine , corn mill machine and other flour mill machine, it can be whole production line or just one single machine .
(3) Biodiesel machine. Oilseeds make biodiesel machine, used cooking oil /used vegetable oil make biodiesel machine, waste plastic/tyres pyrolysis to diesel machine . 
Our products sells well in global market, 
and are exported to Russia,Malaysia,Kazakhstan,Thailand, Indonesia,Egypt, Philippines Russia,Kazakhstan,Uzbekistan,Tajikistan, Bolivia, Peru, Indonesia, Bangladesh, Thailand, the Philippines, Myanmar, Egypt, Sudan, Nigeria, Rwanda,Tanzania and other countries & regions,and now we have developed into a major oil machinery manufacturing base in China.

 

Parameters Table

Model NO.
YZYX130GX

Appearance
Uniaxial

Press Materials
Sesame

Condition
New

Customized
Non-Customized

Name
Screw Oil Extractor

Size
2150X1100X1350mm

Power
18.5kw

Gear Box
Bevel, Strong Duration and Anti-Abrasion

Transport Package
We Use Top Standard Fumigated Wooden Box Packing.

Specification
ISO, SGS, BV

Trademark

Origin
Sichuan, China

HS Code
84792000

Production Capacity
400 PCS/Month

Parameters Table

Model NO.
sw-081

Size
8inch

Transport Package
Gift Package or OEM Package

Specification
hand-blown

Trademark
SWT GLASS

Origin
China

Parameters Table

Model NO.
YZYX40

Type
Spiral Oil Press

Application
All, Rapeseed, Cottonseed, Soybean, D Peanut, Ect.

Appearance
Uniaxial

Condition
New

Customized
Non-Customized

Press Materials
Vegetable Oil

Color
Can Be Customized

Daily Processing Capacity
8-12kg/H

Power
400W

Dimension(L*W*H)
560X250X280mm

Weight
35kgs

Certification
ISO, BV, SGS

Automatic Grade
Semi-Automatic

Usage
Rapeseed, Cotton Seed, Soybean, Peanut, Flax Seed, Ect

After-Sales Service Provided
Engineers Available to Service Machinery Overseas

Transport Package
Fumigated Wooden Packing, or as Customers′ Request

Specification
ISO BV SGS

Trademark

Origin
Sichuan, China

HS Code
8479200

Production Capacity
400 PCS/Month

Parameters Table

Model NO.
YZYX40

Type
Spiral Oil Press

Application
Beans, Cooking Oil Machine

Appearance
Horizontal

Press Materials
Sunflower

Condition
New

Customized
Customized

Processing Capacity
8-12kg Per Hour

Size
560*250*280mm

Driving Force
Electricity or Diesel Engine

Press Method
Hot or Cold Press

Oil Press Power
400W/220V

Oil Content of Dry Cake
< 5.5-7%

Weight
35kg

Spiral Axes Rotate Speed
30-42r/Min

Advantage
Press Ability Is Stronger, Oil Yield Is Higher

Transport Package
Wood Box

Specification
SGS, ISO, BV, CQC

Trademark

Origin
Sichuan, China

HS Code
8479200000

Production Capacity
400PCS Per Month

Parameters Table

Model NO.
XHC-P8-001

The Machine Size(mm)
1200*900*1800 (L*W*H)mm

Spraying Dimension(mm)
400*400*80 (X*Y*Z)mm

Repeated Positioning Accuracy
±0.02mm

Motion Control
8 Axis Servo Motor

Transport Package
The Wooden Case

Specification
1200*900*1800 (L*W*H)mm

Trademark
XHC

Origin
Dongguan

HS Code
8424899990

Production Capacity
4pieces/Weeks

Parameters Table

Condition
New

Customized
Customized

Production Name
Oil Mill Oil Extraction Machinery

Press Type
Cold & Hot Pressing Machine

Automatic Grade
Automatic

Weight
3500kg-12650kg

Material
Stainless Steel

Capacity
4-180tpd

Warranty
12 Months

Power(W)
13-160kw

Brand Name
Xld

Color
Clients′ Requirements

Transport Package
Plywood

Specification
3176X1850X2600MM

Trademark
kinetic

Origin
China, Hubei

Production Capacity
10000

Parameters Table

Model NO.
HT-CPO

Condition
New

Customized
Customized

Capacity
5-100t/D

Color
Red, White or Customized

Warranty
12 Months

Material
SUS304/316

Press Material
Crude Oil

Function
Making Palm Oil

Quality
Top Level

Weight
up to Specification

Transport Package
Nude Packing or Customized

Specification
ISO9001, CE, SGS, IAF, CNAS

Trademark
HUATAI

Origin
Henan, China

HS Code
8479200000

Production Capacity
20set/Month